Bent Tram A/S
Mechanical Testing Solutions

Accessories

Mettler Toledo Balance

In conjunction with our range of mechanical testing systems it is often required to make a number of additional measurements - such as weight. These measurements can be performed automatically by the use of our customized measuring systems, which will be interfaced directly to our mechanical testing system and the connected PC. As an option they can also be supplied with their own interface and PC.vv

Mettler Toledo Deckmate Mettler Toledo SB8000
Readability50 g1 g
Repeatability0.5 g
Linearity ±0.5 g
Sensitivity ±12 ppm/°C
Maximum capacity220000 g8100 g
Stabilization time2.5 s
Contact plate
Contact plate 50 PaContact plate 250 Pa
Dimensions (WxDxH)200x200 mm200x200 mm
Pressure50 Pa250 Pa
Link Sensor to USB
Sensor to USB
InterfacesUSB - (power supply via USB)
Dimensions (WxDxH)130x108x58 mm
Connections1,2 or 4 as standard (Strain-gauges, loadcells, extensometers, potentiometers etc.)
Sensor excitation5 V
Loadcell drive capacity150-2000 Ω
Sensor wiring4 or 6
Sensor input rangeTypical ±1-4 mV/V (adjustable 1-1000 mV/V) (Gain = 1 to 128)
Signa filtersinc3 or sinc4 filter: 1,2-1200 Hz Optional extra software filter in TramSmart (moving average)
Resolutionmax. ±2 million increments (±250,000 at 2 mV/V)
Temperature effect on zeroBetter than 1ppm/°C
Temperature effect on spanTypical 1ppm/°C
Store temperature range-20...+60°C (Avoid wet and moist conditions)
Operating temperature rangeCompensated 0...+40°C (Avoid wet and moist conditions)
DriftTypical 10 ppm /1000hours (gain 1)
Ingress ProtectionIP50
Weight0.5 kg
Strain Gauged Column
Strain Gauged Column 2MN for EN 12390-4
Dimensions (WxDxH)130x108x58 mm
Connections4 (One for each strain-gauge)
Sensor excitation5 V
Loadcell drive capacity150-2000 Ω
Sensor wiring4 or 6
Sensor input rangeTypical ±1-4 mV/V (adjustable 1-1000 mV/V) (Gain = 1 to 128)
Signa filtersinc3 or sinc4 filter: 1,2-1200 Hz Optional extra software filter in TramSmart (moving average)
Resolutionmax. ±2 million increments (±250,000 at 2 mV/V)
Temperature effect on zeroBetter than 1ppm/°C
Temperature effect on spanTypical 1ppm/°C
Store temperature range-20...+60°C (avoid wet or moist conditions)
Operating temperature rangeCompensated 0...+40°C (avoid wet or moist conditions)
DriftTypical 10 ppm /1000hours (gain 1)
Ingress ProtectionIP50
Weight0.5 kg
Chamber for tensile tester
Stainless steel chamber. 
Circulation fan, heating power, window door heating to remove condensation. 
4 glass-platens.
Temperature regulator magnetic valve for fluid N2 to cooling 1,8 kW 220 volt to heat.
With frame to move chamber in and out heat regulator box.
Standard size: inside 220 x 200 x 580 mm. Outside 360 x 480 x 766 mm.
Heat up speed: 15 deg. C/min (from 20 to 80 deg. C without grip)
Chamber for tensile tester
InterfacesOptional RS232/RS485
Dimensions (WxDxH)360 x 480 x 766 mm
Operating temperature range-80 deg. C to 280 deg. C
OptionsDoor light / 350 deg. C temperature range / Heat exchanger
Extensometer

Extensometers are used for measuring a deflection directly on the test specimen. Extensometers comes in many different kinds, from measuring very small deflections on reinforcing steel to large deflections on plastic materials.

Epsilontech 3542-100M-010-STEpsilontech 3542-50M-010-STLong travel extensometer 1100 mmTransducer for inner pipe diameter change
InterfacesAnalog Analog Digital Digital
Sensor excitation5 V5 V
Resolution0.04 mm 0.04 mm
Operating temperature range-40 deg C to 100 deg C
OptionsSpecial coating and stainless steel knife edges available Special coating and stainless steel knife edges available