The LINK loadcell-to-USB is a small light box that connects directly to a USB connector on a PC – and a loadcell. No external power supply is required. The unit comes with the TramSmart software running on Microsoft Windows XP/Vista/Windows 7

Using the TramSmart software you can save identification (with calibration data) for several loadcells, and when starting the TramSmart software you select the connected loadcell from a list. The load is displayed on the PC and it can be transferred to any Windows program – just by using a shortcut key. Due to the extremely high accuracy, it is ideal for calibration purposes, but it is also very handy for all kinds of in-field measurements. You can save snapshot values or you can select continuous sampling – and the data will be put in the clipboard – ready for pasting into any program.

The TSU – Sensor to USB:

• Is ideal for a full-bridge sensor, e.g. a loadcell, pressure sensor, or an extensometer.
• It can also be used for potentiometer, thermocouple, and other low voltage sensors.
• Is an easy way to record measurements of force, strain, position, temperature, etc. on a PC.
• Is ideal for both snapshot as well as continuous recording.
• Have an outstanding accuracy and a resolution with more than 1 million divisions.
• Is ideal for various laboratory and in-field measurements.
• Is the answer for all calibration purposes with force/pressure sensors and extensometer.
• Is small and light – only 470 g
• Simultaneous sampling of all channels
• Optional external trigger button in a 2m long wire

Simple to use software will enable the operator to grow familiar with the LINK-sensor-to-USB after a very short time, even if he has no experience at all in operating a PC. The equipment offers a great opportunity to improve both laboratory and in-field measurements through instantaneous data generation. It is ideal for calibrating testing machines according to EN ISO 7500-1.

With TramSmart for Microsoft Windows XP/Vista/Windows 7:

• Automatically detects LINK 4-loadcell-to-USB at startup of TramSmart
• On demand or continuous recording of measurements
• Various calibration methods and identification of any channel combination
• Simultaneously display of all channels and channel-combinations.
• Shortcut key to transfer measurements to any MS Windows program.
• Optional display of additional devices, e.g. Thickness Gauge, Extensometer, extra loadcells, balances, etc.

Due to the modular design and the versatility of the software, tailored systems can be offered at a moderate price.

Please contact TRAM or your local distributor for additional information.